Follow us :

Willem EPROM Programmer PCB50

Willem EPROM Programmer PCB50
Willem EPROM Programmer PCB50Willem EPROM Programmer PCB50
group name
Eprom programmer
Min Order
1 piece
brand name
SICO Auto Diagnostic Tools
model
SP02
update time
Mon, 19 Sep 2011 01:57:51 GMT

Paramtents

  • Weight 2.5KG

Packging & Delivery

  • Min Order1 piece

Briefing

Willem EPROM Programmer PCB50
Quite possibly the best general purpose programmer around and certainly the best

Detailed

                             Willem EPROM Programmer PCB50
**NEW PCB** - Quite possibly the best general purpose programmer around and certainly the best entry level programmer available, the Willem Programmer is based on a tried and true design. Many adapters are also available for different programming applications.
A Quality Product - you really do get what you pay for...

NOTE THAT THE WILLEM PROGRAMMER PCB5.0 REQUIRES A PARALLEL PORT FOR DATA AND A USB PORT FOR POWER (an additional power supply is required for programming voltages over 12.75V, older eproms require this)

NEW Improved Version PCB 5.0

 

Features and Advantages

Can program EPROM, EEPROM, FLASH, Serial EPROM, Serial Flash and MORE (Vpp 3.6V, 12.5V, 21V, 25V)

Supports CHIPS (EPROM, EEPROM, FLASH, I2C, PIC, MCS-51, AVR, 93Cxx, ISP) and more. Includes an ISP header on the PCB for In-Circuit Serial Programming (ICSP).

This hardware version (PCB50) is more STABLE than version PCB4.5C and supports 3V3-3V6 SPI Flash devices.* SPI flash chips are found on new motherboards, DVD burners, hard drives etc. Note that if you need to flash or reflash a new SPI device, BIOS chip etc.

It can program up to 10% faster than the Willem PCB4.5C, 20% faster than Willem EPROM Programmer (PCB3.5C) / (PCB4C) and 50% faster than the PCB3B+

Uses the power supply from a USB port or from an optional power supply or plug pack (not supplied)

You can choose between Version PCB3B/PCB3.5 and PCB4.5C using jumper setting if required

Latest Version - adds extensive support for 3V6 SPI Flash Devices*

*** This NEW PCB5.0 has Adapters PLCC32 to DIP32 and Firmware Hub/LPC on-board ***


A Quality Product AND Technical Support

All Software is included on CD
Software Version 0.98D12 - for PCB5.0 is now released.
Software Version 0.98D10 - for PCB5.0 is now released.
Software Version 0.98d9 - for PCB5.0, in stable beta now - adds support for 3V6 SPI Flash devices and includes many improvements.*
Software Version 0.98d6 - update June 2006 (will work with PCB4.5C - not for PCB5.0)
Software Version 0.98d5 - update September 2005 (called PCB45-0.98D5 - for use with the PCB5.0)
Software Version 0.98d4 - update August 2005
Software Version 0.98d3 - more support for PIC micro's
Software Version 0.98d2 - further support for 3.5/3.7/4c
Software Version 0.98d1 - stability and support for 3.5/3.7/4c
Software Version 0.98d - some fixes for XP
Software Version 0.98c - adds lots of support for PIC micro's.
Software Version 0.98a ( 0.98a [alpha] )
Software Version (0.98ap) *** CAN UNLOCK AM29F040B ***
Software Version 0.97j
Other software Versions are on the DVD
Willem EPROM Software Operating Manual (included on the DVD)


Normally, products that have only USB power cannot use VCC> (greater than) 5VDC. This product provides a socket on the PCB, so it can use VCC more than 5VDC. (plugpack/transformer 9VDC not supplied) And, increased programming voltages are selectable by jumper, no modification required. Schematic with jumper settings is supplied.

The back of circuit board is covered by a sheet of perspex and completely protected from a short circuit.


Why do I need one?
- Refreshing, Upgrading, Programming BIOS chips.
- Copier, Fax machine, Printer main board maintaining or repairing.
- Motor Vehicle memory device, MEMCAL or ECU code reading, writing.
- VCD, DVD, Color TV maintaining or repairing.
- Neon Light Controller code writing.
- MCU development - programming for MCS-51 series, AVR series and PIC series MCU.
- Repairing, reading, writing, programming PC motherboard BIOS Chips.
- Upgrade the chip in your cars computer.
- Modify the chips in your Xbox or PlayStation Console.
- Programming MicroChip PIC Micros.
- Programming ATMEL AVR Micros.
- Flash a 3V6 SPI device on your motherboard or HDD.

What do you get:
+ A BRAND NEW Willem Eprom Programmer PCB5.0
+ A USB Cable to connect to your PC
+ A Parallel Port Cable to connect the programmer to your PC
+ A CD containing all the software


NEW SPI FLASH DEVICES SUPPORTED

WINBOND
W25X010,W25X020,W25X040,W25X080,W25X16,W25X32,W25X64

MXIC
MX25L512,MX25L1005,MX25L2005,MX25L4005A,MX25L8005A,MX25L1605,MX25L3205
MX25L6405

EON
EN25B05 , EN25B10 , EN25B20 , EN25B40 , EN25B80 , EN25B16 , EN25B32 , EN25B64
EN25P05 , EN25P10 , EN25P20 , EN25P40 , EN25BP80 , EN25P16 , EN25P32 , EN25P64
EN25D80 , EN25D16 , EN25F20 , EN25F40 , EN25F80 , EN25F16

AMIC
A25L05P-B,A25L10P-B,A25L20P-B,A25L05P-T,A25L10P-T,A25L20P-T,A25L512
A25L010,A25L020,A25L040,A25L080;,A25L016,A25L032

pFLASH
Pm25LV512,Pm25LV010,Pm25LV020,Pm25LV040,Pm25LV080,Pm25LV016

Numonyx (ST)
M25P05,M25P10,M25P20,M25P40,M25P80,M25P16,M25P32,M25P64
M25PE10,M25PE20,M25PE40,M25PE80,
M25PX80,M25PX16,M25PX32,M25PX64

SPANSION
S25FL004A/040A,S25FL008A,S25FL040A-T,S25FL040A-B,S25FL016A,S25FL032A
S25FL064A

ATMEL
AT25DF021,AT25DF041A,AT25DF081,AT25DF081A,AT25DF161,AT25DF321A
AT25DF641,AT26DF041,AT26DF161A,AT26DF321